Doppler Ultrasonic Flow Meter for Dirty Liquids with Datalogger

Gaining flow measurements from inside a pipe can sometimes be tricky. The Pulsar Measurements DFM 6.1 Doppler Flow Meter is a non-contact, clamp-on flow meter allowing you to measure the flow from outside the pipe. Its Doppler technology makes it perfect for use as a water flow meter, specifically for difficult liquids, or liquids with suspended solids (i.e. dirty water) such as wastewater, slurries, sludge, chemicals, viscous liquids, and abrasives. The non-invasive Doppler ultrasonic flow meter fits a pipe 12.5 mm (0.5 in) inside diameter or larger, and clamps to the outside of the pipe, gaining flow measurement readings without interrupting the process.

Specifications:

• Output: 4-20mA and 2 x Relay
• Datalogger: 26M points
• Cable Length: 7.6m
• Power: 9-32VDC
• Protection: IP66
• Temp: -20° to 60°C
• Sensor: SE4-A Clamp-on 12.5mm to 4.5m ID pipes