HH4-WT-5C

The HH4-WT-5C load cell tester stores the calibration details of multiple load cells/transducers, which allows you to move the device between more than one application without having to do the complete calibration procedure every time. 

There is an optional “dongle” (HH4-OPT-DB9/DS1) available that can be plugged into the port where you would usually connect a PC. The purpose of the external memory is to allow calibration scaling details for a particular load cell to be stored. The external memory is then permanently connected to the load cell. The external memory allows the HH4-WT to be used with many load cells, each attached to individual memory chips, without the need to recalibrate every time the load cell is connected. 

Specifications:

• Configurable to your load cell specifications.
• Pushbutton calibration and setup
• Stores calibration of multiple load cells/transducers
• Recalls maximum and minimum readings
• Up to 22 bit resolution
• Pushbutton zero
• Selectable sample rate up to 100 samples/sec.
• Multiple units of measurement selectable(external label required)
• Digital filter improves stability
• Rugged construction
• Automatic low battery indication
• includes 9V battery,
• Includes DB9 solder connector.
• Padded carry case (optional)
• Programmable auto turn off