UniMeasure Draw Wire Sensor with Ratiometric Output, 50mm to 2m, 1K ohm

UniMeasure's original basic design PA draw wire sensor provides a ratiometric output signal using a precision potentiometer.

With a steady state input voltage and with the potentiometer connected as a voltage divider, the ratiometric output voltage is directly proportional to wire rope extension. The unit will function with any input voltage up to 30 volts maximum.

To obtain best output linearity, the input voltage should be well regulated. 13 measurement ranges are available, the smallest being 0-50mm and the longest 0-2000mm.